Filling the screw holes

Today we managed to work 2 more hours to fill the screw holes with epoxy, using a plastic syringe and a toothpick. We counted about 80 screw holes per panel, and used about 160 grams of resin.

Here's a photo showing the external faces of the panels with all the holes closed with masking tape.

We then covered the table with some plastic sheets, turned the panels inner face up, and filled the holes. Several of them required repeated refilling (mostly those which required additional "work" to estract the screws). Here's a photo which gives an idea.

Total work time to date: 60 hours