This view shows the bottom side, framed in 2x4s which will be glued and screwed to the bottom
while this shows the upper part which will be glued to the low side of the sole.
Total work time to date: 270 hours
Diary on the construction of a Seaclipper 20, a plywood trimaran designed by Jim Brown and John Marples. Our boat's Sail No. is 50. The boat has been named GEODETICA and was launched on september 28th, 2024.
Sunday, April 26, 2015
Daggerboard trunk (2)
Two more hours to cut and rip all pieces necessary to build the daggerboard trunk. As you can see in the pictures, the framing lumber is pretty thick so this is likely to be the strongest piece of the whole boat.
This view shows the bottom side, framed in 2x4s which will be glued and screwed to the bottom
while this shows the upper part which will be glued to the low side of the sole.
Total work time to date: 270 hours
This view shows the bottom side, framed in 2x4s which will be glued and screwed to the bottom
while this shows the upper part which will be glued to the low side of the sole.
Total work time to date: 270 hours
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment