We had prepared the daggerboard trunk for the glue up but the resin went off in a very short time so we had to throw away a fairly sized blob. Next time...
Total work time to date: 278 hours
Diary on the construction of a Seaclipper 20, a plywood trimaran designed by Jim Brown and John Marples. Our boat's Sail No. is 50. The boat has been named GEODETICA and was launched on september 28th, 2024.
Saturday, May 9, 2015
Tids and bits
Four hours today, to work on things that are not specifically mentioned on the plans. We cut, glued and screwed 8 additional supports for the sole panels at the bulkheads corners. Two of those are visible in the photo below
We had prepared the daggerboard trunk for the glue up but the resin went off in a very short time so we had to throw away a fairly sized blob. Next time...
Total work time to date: 278 hours
We had prepared the daggerboard trunk for the glue up but the resin went off in a very short time so we had to throw away a fairly sized blob. Next time...
Total work time to date: 278 hours
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment