OB motor mount

Last night, with the help of our friend Raffaele, we turned the boat rightside up again to work on the deck. This was easier than I had imagined even if the boat is now much heavier than before because we installed the bottom and the massive centerboard trunk.

Before decking the boat though we have to install the OB motor mount, which is a 2x6 which protrudes through the hull on the starboard side just abaft of the aft aka. It was quite stressing to cut a rectangular opening through the hull, but here is the whole thing ready to be glued and filleted.

Total work time to date: 363 hours