Finally, we prepared about 800 grams of thickened resin and glued the two decks using the marks which we had previously scribed on the hull.
Total work time to date: 405 hours
Diary on the construction of a Seaclipper 20, a plywood trimaran designed by Jim Brown and John Marples. Our boat's Sail No. is 50. The boat has been named GEODETICA and was launched on september 28th, 2024.
Saturday, March 19, 2016
Vaka decks
It took five hours, but at last we did it. We glued both forward and rear deck on the vaka hull. We spent the morning preparing everything: we sanded and cleaned the surfaces to be glued and prebored the screw holes. After lunch we inserted and tightened the 8 bolts for the aka blocks, bedding each one in 3M4200.
Finally, we prepared about 800 grams of thickened resin and glued the two decks using the marks which we had previously scribed on the hull.
Total work time to date: 405 hours
Finally, we prepared about 800 grams of thickened resin and glued the two decks using the marks which we had previously scribed on the hull.
Total work time to date: 405 hours
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment