I then glued the two handles/stopper to the centerboard
and finally I prepared some fairing putty and coated one side of the rudder blade. Tomorrow we'll se how this worked out
Total work time to date: 478 hours
Diary on the construction of a Seaclipper 20, a plywood trimaran designed by Jim Brown and John Marples. Our boat's Sail No. is 50. The boat has been named GEODETICA and was launched on september 28th, 2024.
Thursday, August 25, 2016
Fairing the blades (1)
Two hours of work today. Since Cinzia is on vacation, I'm working alone so I'm concentrating on smaller tasks. Today, after grinding the fg edges around the transom, I decided to work on the blades which are not complete yet. So first of all I sanded both blades with the power sander (40 grit) and a hand pad (60 grid)
I then glued the two handles/stopper to the centerboard
and finally I prepared some fairing putty and coated one side of the rudder blade. Tomorrow we'll se how this worked out
Total work time to date: 478 hours
I then glued the two handles/stopper to the centerboard
and finally I prepared some fairing putty and coated one side of the rudder blade. Tomorrow we'll se how this worked out
Total work time to date: 478 hours
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment