Saturday, April 27, 2019

We're back

Hiya all! After a very long interruption due to several reasons, here we are for what we hope it's going to be our last period working on the boat. We worked three hours this saturday, to give one of the three hulls the final sanding prior to painting. Our previous experiments have shown that the water based acrylic enamel is too soft, and we decided to use a specific one-pot polyurethane enamel.We lightly sanded one of the float hulls using 240- and 320-grit, and than cleaned it.


Then, we decided to try this new enamel on the daggerboard. Tomorrow we will give the second coat.


Total work time to date:684 hours