We then draped the 160 g/sq.m.FG on the side and cut it to size with scissors
and then wetted out the FG in place with about 600 grams of epoxy spread out with a roller.
Total work time to date: 438 hours
Diary on the construction of a Seaclipper 20, a plywood trimaran designed by Jim Brown and John Marples. Our boat's Sail No. is 50. The boat will be named GEODETICA.
Sunday, June 19, 2016
Fiberglassing the amas (1)
Three hours to fiberglass one side of the first ama. We first sanded the side with 120 grit on the rotoorbital, in particular to feather the edge of the bottom fiberglass but also to take down drips and the like.
We then draped the 160 g/sq.m.FG on the side and cut it to size with scissors
and then wetted out the FG in place with about 600 grams of epoxy spread out with a roller.
Total work time to date: 438 hours
We then draped the 160 g/sq.m.FG on the side and cut it to size with scissors
and then wetted out the FG in place with about 600 grams of epoxy spread out with a roller.
Total work time to date: 438 hours
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment